
ICETEK-XDS200
ICETEK-5100USB
ICETEK-5100 Parallel interface
ICETEK-XDS100
ICETEK-XDS510
ICETEK-XDS560
Extesion module
C6678
C2000 & Motor Drive
VC33
C5000&Speech processing
C6713/C6748/C6416
AM3359/AM3517/Cortex-A8
DM6437/DM6446/DM642
DM368/DM365&Image
DM3730/OMAP3530
OMAPL138/OMAPL137
DM6467&Image processing
Cortex-M3
ARM9
Expansion module
Image capture extension module
Speech processing extension module
Network communication expansion module
ZigBee wireless communications extension module
WIFI wireless communications extension module
Motor control extension modules
Single-DSP board experiment system
Single-ARM board experiment system
FPGA experiment system
Dual-DSP board experiment system
DSP+ARM experiment system
DSP+FPGA experiment system
DSP+ARM+FPGA experiment system
Image/Audio/Network experiment system
High power motor control systems
Medium power motor control experimental system
Experiment system extension module
DSP core board
ARM9&Cortex-A8 core board
Image core board
Image development kits
Motor development kits
Extension module
Imaging/Audio/Network
Motor control
Electronic measurement
Application platform extension module
Imaging/Audio/Network
Motor control
Electronic measurement
End product reference designs extension module
ICETEK-XDS560 V2 Emulator is compatible XDS560v2 with TI technology supports real-time simulation, commissioning and system tracing functionality (System Trace). Built-in USB2.0 high speed Ethernet RJ45 and 48Mbit/s(10/100M) two kinds of communication interface, full support version CCS3.3/4/5/6/7 and above, support for WinXP, Win7 32-bit and 64-bit, and the Win8, LINUX and other operation systems, application TI series platforms, including the latest DM816x, C66xx processor debugging and simulation.
★Hardware features:
- Support the classical IEEE1149.1 JTAG protocol agreement with the IEEE1149.7
- Support for 10/100Mbit Ethernet and Hi-Speed USB2.0 host interface
- Support system (System Trace)
- Support for TI C2000/C5000/C6000/ARM/ARM Cortex/Sitara/OMAP/DaVinci series
- Support for multi-CPU debugging
- Veneer unique MAC addresses, IP addresses can be configured
- The TCLK-programmable, up to a maximum of 64MHz
- HSPT-MIPI standard 60 needle head
- Support JTAG interface from +1.2V to +4.1V
- Anti-jamming simulation-high-speed cable
★Peripheral interfaces:
- USB2.0 high speed interface (480Mbit/s), you can use a USB2.0 interface communicates with the computer debugging
- Host-Ethernet interfaces, you can use the Web interface to communicate with the computer debugging
- Supports standard 14PIN JTAG emulation interface
- Supports standard 20PIN JTAG emulation interface
- Supports standard 60PIN JTAG emulation interface
★Development environment:
- Support for CCS3.3/4/5/6/7 and above the development environment
- Above CCS4 development environment, support for the TI series MCU, DSP and ARM chips
- Support WinXP/Win7 (32-bit or 64-bit) operating system/Win8
- LINUX OS support-debugging
★Supported drivers:
- CCS4/5/6 development environment supports the TI processor core:
· TMS320C28xx
· TMS320C55xx
· TMS320C674x
· TMS320C64x+
· TMS320C66x
· ARM9
· ARM Cortex A9
· ARM Cortex A8
· ARM Cortex M3/M4
· ARM Cortex R4
· Support for TMS320DM6467/DM6467T/DM6446 development and debugging
· Supports 60PIN standard JTAG emulation interface TMS320C6678/DM8168/DM8148 chip development and debugging
★Product configuration:
- ICETEK-XDS560 V2 emulator: 1
- USB cable: 1
- Ethernet cable: 1
- Software CD
- Product manual