ICETEK-AM3359-B Dual Gigabit Network Interfaces

点击：3355　时间：2023-1-1

 ICETEK-AM3359-B minimum system board kit composed by AM3359 core and extension plates. AM3359 Core board is integrated with the main processor AM3359, DDR3, NAND FLASH, JTAG emulation interface, and application expansion board integrates all types of peripheral interfaces, convenient for the user to connect to an external device.

ICETEK-AM3359-B Development Kit for smaller overall size, dimensions 100mm×80mm (without interface dimensions), while its core board size is only 65mm×45mm with processing capabilities, core and extended plates by extending the interface plug connections, user-friendly and OEM develpment.

Due to AM3359 further enhances the image, graphics interfaces, peripherals, and industrial use, plus the suite with dual gigabit network interfaces, and uses the main and auxiliary body separation mode, makes it in industrial communication gateway controllers, industrial sensors, automation, home/building automation, consumer electronics products, connection, vending machines are widely used.

★Hardware specifications:

        - AM3359 ARM Cortex-A8

            · Operating system: Linux, Android, Windows Embedded CE

            · Standard power: 7mW

            · ARM CPU: 1 ARM Cortex-A8

            · ARM Mhz: 800

            · USB: 2

            · EMAC: 10/100/1000, 2

            · MMC/SD: 3

            · CAN: 2

            · UART(SCI): 6

            · ADC: 8-Ch 12-bit

            · PWM(Ch): 3

            · RTC: 1

            · I2C: 3

            · DMA(Ch): 64-Ch EDMA

        - DDR3: 4Gb

        - NAND FLASH: 1Gb

★Peripheral interfaces:

        - Gigabit ethernet network interfaces: 2

        - RS-232 interface: 1

        - USB OTG: 1

        - TF card interface: 1

        - LCD interface: 1

        - JTAG interface: 1

        - UART interface: 1

        - Main processor expansion interface: 2 each 100pin

        - +5V power supply interface: 1

★Software routines:

        - LED control test

        - Press the control test

        - GPIO to control test

        - LCD display control test

        - USB interface test

        - Driver module to compile

        - Memory module

        - 2 Gigabit network file transfer service (TFTP)

        - Touch screen programming

        - Qt programming

        - Embedded systems testing

        - Started with the TF card/SD card

        - Network file system (NFS) test

        - Network file transfer (FTFP) test

        - Nandflash files on system recovery

★Supported development environments:

        - Support for LINUX operating system, version: 3.2.0

        - Support for ANDROID operating system, version: 4.0.3

        - Support for WinCE operating system, version: 7.0

        - Support for running CCS stareware

★Supported drivers:

        - RTC

        - I2C

        - UART (RS232)

        - CAN

        - WIFI (SDIO)

        - USB2.0

        - TCP/IP

        - G ETHERNET (1000M)

        - AUDIO (ALSA)

        - GPMC

        - McSPI

        - MMC

        - LCD

        - TOUCH SCREEN

        - 1 WIRE BUS

        - Nandflash